The cycloidal pinwheel reducer is a new type of transmission device which applies the principle of planetary transmission and adopts cycloidal pin teeth meshing. It has been widely used in military industry, aerospace, metallurgy, mining, petroleum, chemical industry, shipbuilding, light industry, food, textile, printing and dyeing, pharmaceutical, rubber, plastic, and lifting and transportation.
Features
1. High transmission ratio. The transmission ratio is 1/6–1/87 in the first stage of deceleration. The transmission ratio is 1/99–1/7569 in the two-stage deceleration; the transmission ratio in the three-stage transmission is 1/5841–1/658503. In addition, multi-stage combination can also be used according to needs, and the speed ratio can reach the specified large.
2. High transmission efficiency. Since the meshing part adopts rolling meshing, the general transmission efficiency of the first stage is 90%–95%.
3. Compact structure, small size and light weight. Compared with ordinary cylindrical gear reducer, the volume can be reduced by 2/1–2/3.
4. Fewer failures and longer life. The main transmission meshing parts are made of bearing steel, so the mechanical properties and wear resistance are good, and because of rolling friction, there are few failures and long service life.
5. Smooth and reliable operation. Due to the multi-tooth meshing in the transmission process, the operation is stable and reliable, and the noise is low.
6. Easy disassembly and assembly, easy maintenance.
7. Strong overload capacity, impact resistance, small inertia moment, suitable for frequent starting and forward and reverse rotation.
Technical Specifications
1. Model:
According to the transmission ratio, it is divided into: primary, secondary and tertiary.
Single level: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.
Second levels: 00, 20; 32, 42, 53, 63, 64, 74, 84, 85, 95, 106, 117, 128.
Third level: 420, 742, 842, 853, 953, 1063, 1174, 1285.
According to the structure type, it is divided into four types: horizontal type, vertical type, double shaft type and direct connection type.
2. Transmission ratio:
The ratios of the first-stage reduction are: 9, 11, 17, 21, 23, 25, 29, 35, 43, 47, 59, 71, 87.
The ratios of the two-stage reduction are: 99, 121, 187, 289, 319, 385, 473, 493, 595, 649, 731, 841, 1003, 1225, 1505, 1849, 2065, 2537, 3045, 3481, 5133.
The ratio of the three-stage reduction is: 5841-658530
Few models of cycloidal pin wheel gearbox :
XLSD842
XLS853
XLSD853
XLS953
XLSD953
XLS1063
XLSD1063
XLS1174
LSD1174
XLS1285
XLSD1285
BL12
BLD12
BL15
BLD15
BL18
BLD18
BL22
BLD22
BL27
BLD27
BL33
BLD33
If you have demand for cycloid wheel reducers ,please contact with sales@hshmachinery.com
Related Keywords: Cycloid gearbox, cycloid gear reducer, cycloidal speed reducer, china gearbox supplier, cycloidal reducer, cycloid gear speed reducer factory
